 |
|
 |
|
|
- Fastest
and most efficient unloading forage box on the
market!
- Variable
speeds up to 17 feet per minute on the main
apron
.
-- More speed selections than any other forage
box!
- New
and improved all steel design.
- Poly
bonded floor standard in 3200/4200, front/rear
unload boxes.
- Hydraulic
or PTO rear unload available.
|
|
|
Gate Delay System for
faster unloads &
positive gate latch
(Optional)
|
- Also Available as open top trailer
box - |
|
|
 |
| The 4200 frame
features a bolted construction. The 1/2" bolts and
lock nuts fasten the cross members to the main stringers
every 24". You won't find any sheet metal in the Meyer
frame. |
|
|
 |
| The 3200 frame
features an all welded construction. Notice that every
cross member has a gusset for added strength. We use
all heavy duty structural steel in our frame, no sheet
metal. Uprights and crossmembers on 32" centers. |
|
 |
TSS Control
Panel - Simple yet Efficient
The TSS design allows the operator more speed selections
with less moving parts. Low range is 0 - 7'6"/mn.
High range gives you the fastest clean-out in the
industry - up to 17'/mn.
Plus, the Independent Cross Conveyor Clutch
allows you to feather
start your cross conveyor on big loads. |
|
|
 |
Cross
Conveyor Extension
A convenient cross conveyor extension is available
to accomodate large tires or hard to get at spots.
It extends out 24" and can be folded up when traveling.
Standard on 4600 series. |
|
 |
Low Maintenance
- Easy Access
All roller chains have automatic nylon tighteners.
Auger and conveyor bearings are sealed for your convenience.
Variable speed sheaves have 1/2" drive pins, not 3/8". |
|
|
 |
TSS Auger
Design
Auger Feathering System allows the operator to inch
the augers clean without bringing the load forward.
This is accomplished through the variable speed drive.
No extra belts. Notice the large 18" augers
(not beaters)
are tapered back more than others for the most even
feed on the market. |
|
PTO Drive Front & Rear Unload
Move the lever to disengage rear drive. The PTO system
eliminates any
chance of a hydraulic system stalling. |
|
Main Apron
Drive Coupler
Fast and easy to change! Just
move the drive coupler to change
direction of unloading
(Both PTO & Hydraulic avail.) |
PTO Rear Unloading
Meyer is the only forage box that
offers both PTO & Hydraulic front
and rear unload models. Approx. 30
seconds
PTO rear unload. |
|
Hydraulic Rear Unload
Rear door opens and closes without
assistance. Latch system locks and
unlocks on its own. |
Main Apron Tightner
New style tightener system for main
apron chains. This system is located
under the floor and is more practical
than other brands. |
|
Poly Floor Standard Equipment
All front & rear unload forage boxes
have a poly floor to eliminate main
apron chain, floor & gear box wear. |
