The
4500 and 4600 frame features a bolted construction.
The 1/2" bolts and lock nuts fasten the cross
members to the main stringers every 24". You won't
find any sheet metal in the Meyer frame.
|
The
3500 frame features an all welded construction.
Notice that every cross member has a gusset for
added strength. We use all heavy duty structural
steel in our frame, no sheet metal. Uprights and
crossmembers on 32" centers.
|
TSS
Control Panel - Simple yet Efficient
The TSS design allows the operator more speed
selections with less moving parts. Low range is
0 - 7'6"/mn. High range gives you the fastest
clean-out in the industry - up to 17'/mn.
Plus, the
Independent Cross Conveyor Clutch allows
you to feather start your cross conveyor on big
loads.
|
Cross
Conveyor Extension
A convenient cross conveyor extension is available
to accomodate large tires or hard to get at spots.
It extends out 24" and can be folded up when traveling.
Standard on 4600 series.
|
Low
Maintenance - Easy Access
All roller chains have automatic nylon tighteners.
Auger and conveyor bearings are sealed for your
convenience. Variable speed sheaves have 1/2"
drive pins, not 3/8".
|
TSS
Auger Design
Auger Feathering System allows the operator to
inch
the augers clean without bringing the load forward.
This is accomplished through the variable speed
drive.
No extra belts. Notice the large 18" augers
(not beaters)
are tapered back more than others for the most
even feed on the market.
|
Open
Top Option
Available with or without height extension on all
models. All open tops come standard with side support
kit
|
High
Volume Options
12" taller sides for maximum
capacity. (Includes side support kit). Available
with or without roof
6" taller roof with standard
side height.
|
Dimensions/Specs. |
Heavy
Duty
-Front Unload- |
Extra
Heavy Duty
-Front Unload- |
Industrial
Duty
-Front Unload- |
| Model |
3514 |
3516 |
3518 |
4516 |
4518 |
4616 |
4618 |
4620 |
4622 |
| Floor
Length |
14'6" |
16'6" |
18'6" |
16'6" |
18'6" |
16'6" |
18'6" |
20'6" |
22'6" |
| Overall
Length |
17'4" |
19'4" |
21'4" |
19'4" |
21'4" |
19'4" |
21'4" |
23'4" |
25'4" |
| Weight |
3960# |
4240# |
4520# |
4480# |
4760# |
4680# |
4960# |
5240# |
5520# |
| Main
Apron |
667H |
667H |
667H |
667H |
667H |
667X |
667X |
667X |
667X |
| Overall
Width |
All
Models 107" |
| Inside
Width |
All
Models 87" |
| Overall
Height |
All
Models 113 1/2" w / Std. Roof |
| Inside
Height |
All
Models 94" w / Std. Roof |
| TSS-Total
Speed System |
All
Models - Low Range: 0 - 7.5' / minute
High Range: 0 - 17' / minute |
| Quick
Removable Roof |
All
Models - Std. Equipment |
| Auger
Feathering System |
All
Models - Std. Equipment |
| Unloading,
Even Feed Augers |
3
Large 18" Diameter Augers. Drum Style Design
w / 2" Auger Teeth |
| Power
Source |
540
rpm PTO Drive or Hydraulic Drive Motor (All Models) |
| Cross
Conveyor Feed Delivery |
Either
Left or Right Hand Discharge |
| Cross
Conveyor Outfeed |
12"
Extension Std. (24" Fold-up Opt.) |
24"
Fold-up Std.
|
| Cross
Conveyor Chain |
D662
Pintle Chain w / Hold-Downs - 21" width |
| Safety
Clutch |
All
Models - Std. Equipment |
| IOC-Independent
Outfeed Clutch |
All
Models - Std. Equipment |
| Poly
Floor |
Optional |
Box
Tie Down Kit &
Transport Lights |
All
Models - Std. Equipment |
| Gate
Delay System |
N/A |
| Side
Support System |
Optional
on all Models (Except Std. on Open Top or High Roof
Models) |
6"
Higher Roof
(Includes Side Supports) |
Optional
on all Models |
| 12"
Higher Sides |
Optional
on all Models - Open
Top or Roof Models |
