Our Formula is ready for your Formula!

Meyer Formula Vertical Twin TMR

7 Models from 355 – 1315 Cubic Feet


Nutrition Solutions

Faster Processing Faster Cleanout
Precise Rations Less Horsepower
Lower Load Height

3 Meyer Formula Twin Screw Families

Small Frame F355-F470 Models

  • 355-520 cu. ft. Capacity
  • Integrated subframe provides lowest possible load height with maximum strength
  • (2) 385/65x22.5 recap tires
  • 540 or 1000 pto w/in-line drive (shear protected)

Mid Frame F585-F700 Models

  • 585-760 cu. ft. Capacity
  • 1000 pto w/Formula Two-Speed drive system and electric shift feature
  • Individual Planetary Protection
  • Independent tubular chassis design for heavy loads
  • Featuring our in-line quad axle design with (4) 245/70R19.5 recaps
  • 4 point weigh bar package

Large Frame F815-F1015-F1215 Models

  • 815-1315 cu. ft. Capacity
  • 1000 CV pto w/Formula Two-Speed drive system and electric shift feature
  • Individual Planetary Protection
  • Independent, massive tubular chassis design for heavy loads. Featuring our in-line quad axle design with (4) 385/65x22.5 (walking tandem optional)
  • 4 point weigh bar package
     

Heavy Duty Drivelines are the
Heart of the Formula!

Standard HD Axle:

HD In-Line Quad Axle Design
  • Standard on mid & large frame models
  • Minimizes tire & wheel bearing wear
  • Large frame pictured with 385/65x22.5 tires

 

 

Optional Tandem Axle:

Oscillating/Walking Tandem Axle
  • Optional on Large frame models
  • Perfect when traveling off hard surface
  • Adds 3" load height

Direct, In-Line Drive System:

  • Small Frame Models (355 & 470)
  • Direct, in-line drive system with shear bolt protection
  • 540 or 1000 pto drive with a single speed design
  • 40 rpm max speed for faster processing, unloading and cleanout
  • Robust planetary drives / compare us to the others!

 

Unique Split Drive System:

  • Mid Frame Models (585 & 700) and Large Frame Models (815, 1015 & 1215)
  • Unique, split drive system with individual torque disconnect clutches
  • Individual planetary protection
  • Two-speed drive system with electric shift feature standard!
  • 27 rpm low range / 40 rpm high range - offering power or speed when you need it
  • Massive planetary drives match the capacity of the mixer (not one size fits all like some others!)

 

 

Formula Features and Options

Belt Capacity Extensions are available for all models. Adds approximately 10% to mixer capacity. (Optional)

Tubular Hay Ring is ideal when processing large amounts of hay in your ration – especially on smaller models. (Optional)

 

Truck Mount Options:

  • Truck mounts available in all models
  • Front, LH and Rear door options

Drive Systems:

  • Large Frame (F815-F1015-F1215) feature a HD self-compensating hydrostatic drive with durable, ergonomic electronic controls coupled with a digital system monitor. Electronically modulated door/conveyor functions for smooth, smart operation.
  • Mid & Small Frame (F355-F470-F585-F700) Direct pto or hydrostatic drive options available.
  • Contact factory for details and truck specs.

Two-Speed Electric Shift System

Meyer Formula mixers 585 and larger feature this two-speed electric shift system. Shift quickly and easily right from the seat of your tractor.

 

 

Stainless Steel Side & Baffle Liners as well as Heat-Treated Auger Flighting available for high-usage applications. F1215 and F1015 Commercial versions come standard with heat treated augers and side liners!


 

Door and Conveyor Options

Front Door Options

Incline Discharge Chain Conveyor

  • 24”/36”/48”/60”
  • Hydraulic folding w/LH or RH discharge
  • Chain and slat design
  • Available with magnet tip off
  • Specify hydraulic fold in series w/conveyor drive or separate hydraulic lift function
  • Chain hold down system eliminates buildup under & along side conveyor chain!

Flat Front Belt Extension Conveyor (chain opt.)

  • Flexibility of RH & LH discharge w/ same pass
  • Quiet operation
  • Includes 8” side shift to right or left on poly lined track
  • Belt drape magnet set available

Choose From:

FRONT DOOR - Pictured with Flat Front Belt Extension Conveyer.

SIDE DOOR - (Left, Right or Both) Pictured with Hydraulic Folding Slide Tray.

REAR COMMODITY DOOR

  • Available on all models except 355
  • Perfect for pre-mixes and bale processing
  • Fast off-loads!

Side Door Options

Hydraulic Folding Slide Tray

  • Folds up for extra clearance on transport
  • Includes magnet set
  • Provides additional feed clearance from tire

Belt Discharge Conveyor (chain opt.)

  • 24”/36”/48”/60”/72”
  • Smooth, consistent deliveries to match your operation
  • Magnet package available
  • Chain conveyor available in lieu of belt

12" Belt Slide

  • Simple and efficient
  • Pictured below w/optional Magnet package

 

7 Models from 355 – 1315 Cubic Feet

Farm Equipment Buyers Trust the Name Meyer!

 

SPEC SHEETS:

 

MODEL - DIMENSIONS (INCHES)

F355

F470

F585

F700

F815

F1015

F1215

A - Overall Length - side door / frt door

215"/245"

219"/249"

270" / 285"

273" / 288"

296"/326"

300"/330"

304"/334"

B - Mixing Chamber Length

169"

175"

212"

217"

254"

261"

269"

C - Overall Height (Standard Axle)

- Tire Size (Quantity)

385/65R22.5 (2)

385/65R22.5 (2)

245/70R19.5 (4)

245/70R19.5 (4)

385/65R22.5 (4)

385/65R22.5 (4)

385/65R22.5 (4)

- Base Machine

84"

98"

97"

107"

105"

117"

130"

- Belt Extensions

90"

104"

103"

113"

111"

123"

136"

- Hay Retention Ring

90"

104"

103"

113"

111"

123"

136"

D - Tread Width

98"

98"

87"

87"

105"

105"

105"

E - Transport Width - frt conveyor / side conveyor w/36" ext.

98"/110"

98"/110"

99" / 113"

101" / 115"

116"/131"

117"/132"

118"/133"

F - Max Discharge Reach

- Frt Cross Conveyor - flat

7"

7"

9"

9"

9"

9"

9"

- Frt Cross Conveyor - incline-24"/36"/48"

17"/29"/40"

17"/29"/40"

22"/34"/45"

22"/34"/45"

17"/28"/40"

17"/28"/40"

17"/28"/40"

- Side Conveyor-24"/36"/48"/60"/72"

22"/33"/45"/56"/67"

22"/33"/45"/56"/67"

35"/46"/57"/68"/79"

35"/46"/57"/68"/79"

35"/46"/57"/68"/79"

35"/46"/57"/68"/79"

35"/46"/57"/68"/79"

- Side Slide Tray

5"

5"

18"

18"

18"

18"

18"

- Side Belt Extension

3"

3"

16"

16"

15"

15"

15"

G - Max Discharge Height (Standard Axle)

- Frt Cross Conveyor - flat

20.25"

20.25"

26.5"

26.5"

34"

34"

34"

- Frt Cross Conveyor - incline-24"/36"/48" @ 45 deg.

38"/47"/56"

38"/47"/56"

45"/53"/62"

45"/53"/62"

52"/61"/70"

52"/61"/70"

52"/61"/70"

- Side Conveyor-24"/36"/48"/60"/72" @ 45 deg.

34"/43"/51"/60"/68"

34”/43”/51”/60”/68”

43"/51"/60"/68"/77"

43"/51"/60"/68"/77"

52"/60"/69"/77"/86"

52"/60"/69"/77"/86"

52"/60"/69"/77"/86"

- Side Slide Tray

8"

8"

16"

16"

25"

25"

25"

- Side Belt Extension

16"

16"

24"

24"

32"

32"

32"

SPECIFICATIONS

Mixing Capacity

- Cubic Feet - no extension / with extension

355/400

470/520

585/647

693/760

818/910

1016/1112

1215/1315

Maximum Net Load - pounds

12,000

15,600

19,410

22,800

27,300

33,360

39,450

Augers

- Number

2

2

2

2

2

2

2

- Diameter

68"

68"

88"

88"

107"

107"

107"

- RPM - standard / high speed

40

40

27/40

27/40

27/40

27/40

27/40

- Upper Flighting Thickness

1/2"

1/2"

5/8"

5/8"

5/8"

5/8"

5/8" heat treated

- Lower Flighting Thickness

5/8"

5/8"

5/8"

5/8"

3/4"

3/4"

3/4" heat treated

- Knives - adjustable - per auger (Standard/Available)

4/7

4/8

5/7

5/8

5/7

6/8

6/8

Drive

- Planetary

In-Line Drive

In-Line Drive

Split-Drive

Split-Drive

Split-Drive

Split-Drive

Split-Drive

- PTO Drive

540 rpm

540 rpm

1000 rpm

1000 rpm

1000 rpm-CV

1000 rpm-CV

1000 rpm-CV

- Protection

shear-bolt

shear-bolt

torque-disconnect

torque-disconnect

torque-disconnect

torque-disconnect

torque-disconnect

Discharge

Door Opening - Front

35" x 40"

35" x 40"

42" x 40"

42" x 40"

46" x 40"

46" x 40"

46" x 40"

- Side

35" x 40"

35" x 40"

42" x 40"

42" x 40"

42" x 40"

42" x 40"

42" x 40"

- Rear

n/a

35" x 40"

42" x 40"

42" x 40"

46" x 40"

46" x 40"

46" x 40"

Conveyor Width - front/side

30" / 36"

30" / 36"

36" / 42"

36" / 42"

36" / 42"

36" / 42"

36" / 42"

Flat Front Cross Conveyor Travel - left or right

8"

8"

8"

8"

8"

8"

8"

Tub and Trailer Construction

- Floor Thickness

1/2"

1/2"

5/8"

5/8"

3/4"

3/4" (1" opt.)

1"

- Sidewall Thickness

1/4"

1/4"

1/4"

1/4"

1/4"

1/4"

1/4"

- Trailer or Subframe

single-axle

single-axle

inline quad axle

inline quad axle

inline quad axle

inline quad axle

inline quad axle

- Optional Axle

walking tandem axle

walking tandem axle

walking tandem axle

- Spindle Diameter

2 7/8"

2 7/8"

2 3/4"

2 3/4"

3.50"

3.50"

4.50"

- Scale System

3-point

3-point

4-point

4-point

4-point

4-point

4-point

Tongue Weight - % gross

10%

10%

10%

10%

10%

10%

10%

Tractor Requirement - PTO HP

75

90

110

120

140

160

200