Meyer Manufacturing | Dorchester, Wisconsin

PRODUCTS - Manure Spreaders - V-Max Pull Type

   

V-Max 3245 Super Spreader

V-Max 3245 Super Spreader

Meyer can handle a wide variety of manure:
Pen Packed Manure - Liquid Manure
Sand Bedded Manure - Poultry Litter
Sludge Products - Municipal Wastes

Click Here To View Product Brochure

DOWNLOAD DEMONSTRATION VIDEO OF THIS PRODUCT

The new V-Max Series Super Spreader is the most user-friendly spreader on the market today. The manure pattern stays low to minimize splash and wind carried manure. You can spread in any direction regardless of the wind. The Meyer spreader keeps your tractor and spreader clean. The spreader will unload fast and give you an even, consistent spread pattern. 
 

The Big Difference...
Rear Unload
The rear unload system is low maintenance with this new aggressive design.

Shaft driven 540 RPM vertical expellers combined with break away material guides provide extremely aggressive and consistent spreading without plugging.  The Super Spreaders large 42 X 27" gate opening accepts tough material and others just can't handle.

The vertical expellers are turning in opposite directions at 540 RPM's.  This creates an excellent separation of all types of manure and waste products.  Spread pattern stays low and even.  Wind has no effect on your spread pattern, wind will not drift manure onto your tractor or spreader.

The heavy duty rear gate is 1/2" thick and slides up and down against a thick, non-freezable poly panel. Designed for cold weather usage.

 
The Meyer Spreader is a solid unit made of heavy rust-resistant steel 

(copper bearing 3/16"). The tank has a 10-year warranty against 

rust-through. Check this spreader out before you buy.

Your Meyer dealer will do a demo on your farm.
  
This CUTAWAY DIAGRAM illustrates the SUPER SPREADER'S patented rear unload design.  Material is directed straight out the large back gate of the spreader by two 20" lower augers while the upper auger runs forward to eliminate bridging.  This system requires much less horsepower and unloading time than side discharge spreaders.  And your tractor and spreader stay clean too!
 
Heavy Duty Reduction Drive
Simple, efficient drive systems power the V-Max Super Spreader line with #120 drive chains.  Tough spring loaded chain tighteners are used on all drive line roller chains.  True chain alignment will add years of life to your Meyer Spreader.
.....
 
 
Dimensions/Specs. V-Max 2636 V-Max 3245 V-Max 3954
Capacity Bushels/cu.ft./gallons
  (w/out height extension) -

  (w/ height extension) - 

260/180/1355

360/233/1745

320/227/1694

450/292/2189

390/272/2033

540/350/2617
Weight 6100 lbs. 7640 lbs. 8650 lbs.
Height (w/14L Tire) - 
  (w/Height Ext.) -

  (Optional 16.5 Tire) - 
58 1/2"
Add 9"

Add 1 1/2 "
58 1/2"
Add 9"

Add 1 1/2 "
58 1/2"
Add 9"

Add 1 1/2 "
Overall Width (w/14L x 16.1)
Outside of tires

  (Optional 16.5 Tire) - 

Single Axle
84 1/2"

Add 7"
Tandem Axle
96"

Add 7"
Tandem Axle
96"

Add 7"
Tank Length
Overall Length
12'
18' 5"
15'
21' 5"
18'
24' 5"
Specifications V-Max 2636 V-Max 3245 V-Max 3954
Max. Load
w/Spreader Weight
12,000#/24,000#
Single/Tandem
24,000#
Tandem
32,000#
Tandem
Roller Chain Drive 80-120 80-120 80-120
Constant Velocity PTO
w/Overrunning Clutch
Standard
540 RPM
Standard
540 RPM
Standard
540 RPM
Axle Single/Tandem Tandem Tandem
Hub Size 8 bolt-6000# 8 bolt-6000# 8 bolt-8000#
Spindle Size 2 3/4" 2 3/4" 3"
Frame Construction 8" Channel 8" Channel 8" Channel
Door Opening 27" X 42" 27" X 42" 27" X 42"
Tank Steel Copper-Bearing 3/16" 3/16" 3/16"
Auger Diameter 20" 20" 20"
Auger Flighting Thickness 3/8" sectional 3/8" sectional 3/8" sectional
Drive Line Protection Overrunning
Slip Clutch
Overrunning
Slip Clutch
Overrunning
Slip Clutch
Expeller Speed 540 RPM 540 RPM 540 RPM
H.P. Requirements Min. 65 85 100
Options V-Max 2636 V-Max 3245 V-Max 3954
Height Extension ( Normally 9") Optional Optional Optional
Height Extension (4' - 6') Optional Optional Optional
High Volume Poultry Extension Optional Optional Optional
Auto Oiler Optional Optional Optional
3rd Auger (for solid materials) Optional Optional Optional
Light Package Standard Standard Standard
Independent Lower Auger Shear Hub Sprockets Optional Optional Standard
Hydraulic Lid Optional Optional Optional
1000 RPM PTO Optional Optional Optional
Safety Chain Optional Optional Optional
Truck Mount Optional Optional Optional

See V-Force Spreaders for 1870 - 2430 Gallon Sizes!

See Industrial Spreaders for 3500-4200 Gallon Sizes!